Factory Recommended Service Details

Service #1

  • Check installation of driver's floor mat.
  • Reset Maintenance Reminder Light or system.
  • Inspect all lights and horn for proper operation.
  • Inspect wiper blades, linkage and washers for proper operation. [1]
  • Inspect and adjust level - engine oil, brake fluid, engine /inverter coolant, power steering fluid and washer fluid.
  • Remove & inspect engine air filter. [2]
  • Remove & inspect cabin air filter. [3]
  • Check and record tire tread depth. Examine tires for damage and uneven wear.
  • Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over. [4]
  • Record inspection results, measurements and component condition on inspection form and/or repair order.
(1) Additional parts charges may apply if wipers are found to require replacement during inspection. Additional labour charges may apply for installation. (2) Additional parts charge may apply if engine air filter is found to require replacement during inspection. No additional labour charges will apply for installation. (3) Additional parts charge may apply if cabin air filter is found to require replacement during inspection. No additional labour charges will apply for installation. (4) Additional fee of $19.95+HST for seasonal tire changeover when done with service regular $39.95+HST. Additional charges will apply if TPMS requires reprogramming or if tires are not mounted on rims.

Service #2

  • Check installation of driver's floor mat.
  • Reset Maintenance Reminder Light or system.
  • Inspect all lights and horn for proper operation.
  • Inspect wiper blades, linkage and washers for proper operation. [1]
  • Visually inspect drive belts. Replace engine oil & filter (synthetic 0W16).
  • Lubricate locks, latches and hinges. Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
  • Remove & inspect engine air filter. [2]
  • Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses.
  • Check and record tire tread depth.
  • Examine tires for damage and uneven wear.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over. [4]
  • Inspect differential and transfer case vents for obstruction.
  • Record inspection results, measurements and component condition on inspection form and/or repair order.
  • Remove & inspect cabin air filter. [3]

Service #3

  • Check installation of driver's floor mat.
  • Reset Maintenance Reminder Light or system.
  • Inspect all lights and horn for proper operation.
  • Inspect wiper blades, linkage and washers for proper operation.[1]
  • Visually inspect drive belts adjust tension if required.
  • Replace engine oil & filter (synthetic 0W16).
  • Lubricate locks, latches and hinges.
  • Inspect and adjust level - engine oil, brake fluid, engine coolant, power steering fluid, transmission fluid, differential fluid, and washer fluid.
  • Remove & inspect engine air filter. [2]
  • Remove wheels & visually inspect brake pads, calipers,rotors, brake lines and hoses.
  • Remove brake calipers and/or brake drums. Inspect and measure brake rotors, drums, pads and shoes.
  • Check and record tire tread depth. Examine tires for damage and uneven wear.
  • Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over. [4]
  • Perform 12 Volt battery service and comprehensive electrical charging system evaluation.
  • Inspect valve clearance (audibly). Check steering gear, linkage and shock absorbers for looseness, damage or leakage.
  • Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage.
  • Inspect fuel system for leaks or damage, inspect condition of fuel tank band, fuel tank cap gasket, fuel tank vapour vent system hoses, fuel lines and connections.
  • Inspect engine oil cooler lines and automatic transmission cooler lines if equipped for leakage, looseness or damage.
  • Inspect exhaust system for leaks, damage or broken hangers.
  • Record inspection results, measurements and component condition on inspection form and/or repair order.
  • Remove & inspect cabin air filter. [3]









View Disclaimer